• 2 Channel Mosfet Amplifier
  • PWM Mosfet Power Supply
  • Defeatable, 24dB Per Octave Low Pass Electronic Crossover
  • Adjustable Twin T Bass Boost Circuit @ 45Hz
  • Advanced Overload and Thermal Protection
  • Hi Level Input Connections
  • Input Sensitivity Control
  • Advanced Muting Circuitry Eliminates Turn-On And Turn-Off Noises
  • Metal Film Capacitors/Resistors In Signal Path
  • 24kt Gold Plated High Current Power And Speaker Terminals
  • Isolation Mounting Feet
  • Optional XS Link For Seamless Multiple Amplifier Installation
    Frequency Response +/-1dB, 20Hz to 20 kHZ
    Signal to Noise Ratio (A-weighted) >100dB
    Max Continuous
    Bridged Power @ 1% THD    		 300 watts x 1 into
    4 ohms @ 14.4 Vdc
    Max Continuous Power
    per Channel @ 1% THD    		 150 watts x 2 into 2 ohms @ 14.4 Vdc
    Nominal Continuous Power per Channel @ 1 % THD 75 Watts x 2 into 4 ohms @ 14.4 Vdc
    IASCA/USAC Power Rating 25 Watts x 2 into 4 ohms @ 12.5 Vdc
    Minimum Load when Bridged 2 Ohms
    Minimum Load per Channel 1 Ohm
    Input Signal Voltage Range 0.1 volts to 2 volts
    Crossover Type Resisitor Network, Linkwitz Riley, Lowpass
    Crossover Slope 24 dB per octave
    Crossover Frequency Range 20-550Hz
    Factory Crossover Setting 85 Hz
    Auxilary Output Channels -
    Auxilary Output Frequency Range n/a
    Hi-level Input yes
    Bass Boost 0- to +18dB @ 45 hZ
    Power Supply Voltage 10Vdc to 15.5Vdc
    Recommended Fuse 30 amp
    Dimensions, Chasis 7.00L x 9.25W x 2.00H
    Dimensions, Overall 8.25L x 9.25W x 2.10H