The XPL is the most extreme subwoofer ever created by Stillwater Designs. Think of it as a "Super Competition"-more power handling, longer voice coil, greater cone excursion, cast aluminum basket-with the new XPL you get all the super low bass response of our world famous Competition subs plus a whole lot more from a 20 to 30% smaller enclosure! This year's XPLs are built on the same massive cast aluminum basket as the KICKER Solo-Baric, with the same Perimeter Venting cooling system for the driver's motor structure and heavy-duty push terminals for solid connections to larger gauge speaker wire. Increased excursion means the XPL can move huge amounts of air for huge amounts of SPL. The extra-length two-layer, round wire voice coil has plenty of room to travel, thanks to a deeply bumped backplate and beefed-up suspension. The cone is beefed up, too-heavier, more rigid, and incorporating KICKER's famous Inverted Structural Dome-designed to move massive air without flexing under pressure.
KICKER XPL Specifications | ||||||||
Model |
Size (in.) |
Impedance (ohms) |
Maximum Amplifier Power (watts)* |
Sensitivity (dB 1w/1m) |
Frequency Response (Hz) |
Mounting Depth (in., mm) |
Mounting Hole Diameter (in., mm) |
Recommended Sealed Enclosure Volume (cu.ft, l) |
X15c |
15 |
2, 4, 8 |
600 |
90.0 |
23-500 |
7, 178 |
14-1/16, 357 |
1.8-2.7, 50.9-76.4 |
X12c |
12 |
2, 4, 8 |
500 |
88.5 |
25-500 |
5-1/2, 140 |
11-1/8, 283 |
1.0-1.5, 28.3-42.5 |
X10c |
10 |
2, 4, 8 |
350 |
88.5 |
25-500 |
5, 127 |
9-3/8, 234 |
0.8-1.2, 22.6-34.0 |